標題: Richard Mille Replica Watch RM 011 Black Ceramic Yellow Flash 511.46BK.91-1
無頭像
yoyo
註冊會員
Rank: 1

積分 0
帖子 3
註冊
用戶註冊天數 380
用戶失蹤天數 36
發表於 17:01 
103.138.53.50
分享  私人訊息  頂部


RM 032 automatic upper chain flyback time diving meter

Designed for deep sea diving

We like constraints. Performance, security, efficiency, aesthetics, ergonomic: They are all integrated in this model, which is an automatic timer designed for deep sea diving. There is no mistake in the water. Clumsy and inaccurate may cause serious consequences.

RM 032 provides hours, minutes, seconds, 12 hours accumulators and flying back timing functions, combined with annual calendar, with a large date at 12 o'clock, and a month indicator (number from 1 to 12) is displayed between 4 and 1 (numbers from 1 to 12). 5 o'clock. It also has a running indicator at 3 o'clock. Due to its geometric shape and the rotational frequency of 2 RPM, the correct function of running movement can be checked under the dimming pressure of the light.

Move RMAC2
Automatic upper chain movement with hours, minutes, oversized dates, months, with minutes and second counter, hour counters, running indicators, and variable geometric rotors. Richard Mille Watches for sale

Power reserve
About 50 hours (± 10%), the chronograph runs for 45 hours. The actual power reserve results will depend on the time of use of the timer.

5-stage titanium matrix and bridge
These 5-level titanium alloy parts have a black PVD coating that makes the entire component have high stiffness, and the precise surface flatness necessary to make the gear system function.

The backbone-based flooring and bridges have been widely validated to ensure they meet stringent strength requirements.

Flying return timeline table

Use the buttons between 4 or 5 points to reset the running timeline table in the case where the mechanical device is not stopped.

Running indicator

The run indicator is located at 3 o'clock. Due to its geometric shape and the rotational frequency of 2 rpm, the function of running movement can be checked. replica swiss watches

The running indicator is composed of continuous Superluminova® and black sectors;

Date shows too big

Half-hour, in the red horizontal aperture below 12 o'clock, it can be automatically adjusted for 30 or 31 days.

Monthly display

The semi-instant indicator, the Arabic number is between 4 and 5 o'clock.

Variable geometric rotor
Richard Mille's unique design allows it to accommodate the user's activity level in the motion or non-moving environment. By adjusting the six-bit ribs, the inertia of the rotor can be changed to speed up the winding process during the leisure arm movement, or reduce its winding speed in sports activities.

• Central flange of 5 titanium alloy
• 18K Platinum Weight Segment

5-level titanium alloy screws can adjust the weight segment through 6 possible locations
• 18K Platinum Wings
• Ceramic ball bearings
• A counterclockwise


wholesale replica watches


Motion characteristics

Movement diameter: 39.15 mm
Thickness: 9.00 mm
Number of jewels: 62
Better: Glucydur®, 4 arms, rotation inertia is 4.8 mg • cm 2, lifting angle 53 °
Frequency: 28,800 Vph (4 Hz)
Better wire: Nivarox ELINVAR ®
Shock absorption device: incabloc 908.22.211.100 (transparent)
Gem on the escape wheel: RubiFix (transparent)
Three positions of the valve stem: manual upper chain, date adjustment, time setting

Sports special

case
The Calibre RMAC2 housing is protected from a large-scale case of 50.00 mm x 17.80 mm, waterproofing capacity reaches 300 meters (30 atmospheres), and has a single-way rotary lap that meets ISO 6425 specification, prevents diving from mishand, the whole The case is equipped with 22 screws. The system that is fixed to the housing is completely stable and displays or loosen due to negligence. The baffle is individually rotated in accordance with the ISO 6425 specification to avoid errors that may occur when calculating the dive time.
In order to obtain a clearer visibility in a dim, the first quarter is marked with red highlights. All of these details marks that RM 032 is a tool that is ready to respond to the most extreme conditions. https://www.chronowrist.ru

At the watch, Richard Mille case is currently considered to be one of the best-made case. During the 9-hour milling phase, the triple housing must be operated for 830 operations. At the end of the 11-hour processing phase, each RM 032 housing must pass through an hour of quality control.

Lockown

During the deep sea diving, the water pressure is strong enough to operate one of the pushers in unintentional operation, for example. The Start button of the timer. It is also necessary to take into account the possibility of incorrect operation crown.

In order to avoid potential fatal consequences due to external pressure or accident, Richard Mille developed the lock crown of RM 032, which fixed the push rod and ensured 300 meters perfect waterproof performance.

Simply rotate a ring on the crown to lock the crown and buttons (for unlocking, it is red). This protects the movement of the movement from excessive pressure or crown vibration. The maximum pressure on the seal has enhanced waterproof performance.

The pusher, their respective components and crown take a 10-day processing phase. During this period, many waterproof tests and quality control were carried out. All of these steps are essential to obtain specific ergonomics levels associated with Richard Mille watches. https://www.cheapestwrist.com